Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Wire Straightener
The main structure of the straightening machine is to adjust the angle of the die by rotating the high-speed rotor to achieve straightening effect, and then adjust the wire forward through the adjusting wheel
Product details
The structure of the straightening machine is that the angle of the straightening die is adjusted by the rotation of the high-speed rotor to achieve the straightening effect, and then the wire is adjusted forward through the wire adjusting wheel. When the required size is reached, the wire touches the positioning key and pushes the runway forward by 5mm. When the upper punch presses the vertical wire cutter, the wire will be cut off immediately. The wire will press the open bearing through the pressing plate on the vertical wire cutter, and the wire will automatically fall to the wire holder. If the length needs to be changed, move the positioning key.
Features and scope of use
The straightening machine has the characteristics of reasonable structure, convenient operation, safety and reliability, fast speed, a small error, and no wire running. It is suitable for the straightening of chicken cages, rabbit cages, net covers, pet cages, construction nets, various welding wires, Shule plate wire cutting, and wires for special-shaped nets.
- Double-headed pulling type;
- There is no error in the length of cut reinforcement;
- The construction wire adopts tungsten steel mold;
- The product wire adopts the ball end mold, and the steel bars will not damage the surface.
Precautions for use of wire straightener:
The straightening machine often works against the reinforcement material. When the reinforcement is cut, attention must be paid to the safety of the operation to prevent accidents. There are mainly the following points to remember:
Before the machine is started, some preparations need to be done. Check and confirm that the cutter is free of cracks, the bolt of the cutter holder is fastened, and the protective cover is firm. Moreover, the working table shall be horizontal with the lower part of the cutter. The length of the working table can be determined according to the length of the processing material.
After the inspection, the machine shall be started. At this time, the machine shall be idled. The operation can be started only after the transmission parts and bearings are checked to be in normal operation. When the machine does not reach the normal speed, the material shall not be cut.
When the cutting is started normally, the middle and lower parts of the cutter shall be used to hold the rebar tightly and align it with the cutting edge. The operator shall stand on the side of the fixed blade and press the rebar forcefully to prevent the end of the rebar from popping out and injuring people. It is forbidden to hold the rebar on both sides of the blade with two hands and bend down to feed. It is noted that the diameter and strength of the reinforcement shall not exceed that specified on the mechanical nameplate and the red reinforcement shall not be sheared. When multiple reinforcements are cut at one time, the total cross-sectional area shall also be within the specified range.
When cutting short materials, the distance between the hand and the cutter shall be kept above 1.5m. During operation, it is strictly prohibited to directly remove the broken ends and sundries near the cutter by hand. Nonoperators shall not stay around the steel bar swing and the cutter.
In addition, in case of abnormal mechanical operation, abnormal noise, or skewed cutter, the machine shall be shut down immediately for maintenance. Do not force the straightening and cutting machine to operate. Once there is a problem, the consequences may be very serious.
Foshan Jinchun Industrial Automation Technology Co., Ltd. was established in 1998. It is a technology-intensive industrial company specializing in the development of welding technology and equipment research and manufacturing, integrating scientific research, production, and sales.
With rich experience and strong technical personnel, the company constantly innovates and develops various types of high-quality hardware wire rods, hardware mesh baskets, and other mechanical equipment. It has formed five series of electric fan and industrial fan guard production lines, wire tube evaporator and condenser production lines, pet cage production line, bag cage frame production line for bag filter, buckle machine, and chain machine production line. The company has accumulated more than ten years of development, production, and operation of welding machines and related products. The products are widely used in the fields of manufacturing and production of hardware appliances, lighting, kitchenware shelves, decorative handicrafts, cultural and sports products, electrical and electronic communication batteries, and industrial equipment automation. With a very wide user group.
The company pursues management to promote efficiency, quality for survival, technology for development, strictly implement the national quality assurance system standards, provide customers with high-quality, stable, and reliable products, and perfect high-quality services. Welcome people from all over the world to visit the company. business, and work together to create a better tomorrow.
